Placeholder Image
LAZER Z DIESEL REAR DISCHARGE

LAZER Z DIESEL REAR DISCHARGE

Call for Pricing

Price

Make:
360 Yield Center
Model:
LAZER Z DIESEL REAR DISCHARGE
Category:
Exmark, New, Rear Discharge, Specialty Features

Our Lazer Z Diesel rear-discharge zero-turn mower is ideal for mowing golf courses, municipalities, and parks, requiring effective clipping discharge control and reduced sound output. Enhanced RED Technology enables key mower systems to communicate, increasing the mower’s productivity, longer machine life, and better fuel efficiency resulting in increased profitability for your landscaping business. Available with a choice of 72-, 96-, or 144-inch UltraCut Rear Discharge cutting decks. The 96-inch and 144-inch cutting decks let you mow up to 11.5 acres per hour. Exmark’s rear discharge mower with flex wings pivot up and down, preventing scalping. The Lazer Z Diesel rear-discharge mowers deliver maximum performance when the going gets tough.

Mower Deck Widths: 72″ 96″ 144″

Equipment Specs

Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.
Drive Tires 26×12-12, 6ply Multi Trac®
Cup Holder Standard
Tractor Frame Welded, heavy-duty 1.5″ x 3″ x 3/16″ tubular steel.
Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
Parking Brake Lever-actuated internal wet disc brake.
Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical 12-volt battery with 55-amp alternator.
Engine Brand Yanmar
Engine Model 3TNV88C
Engine Displacement 1,642
Engine Series TNV
Engine Type Common Rail Diesel
Engine Speed 3,000 RPM
Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
Fuel Type Diesel
Fuel Capacity 12-gallon (45.4-L), side fuel tanks
Fuel Indicator Yes – mechanical float type
Drive Hydro-Drive
Drive Description Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler.
Speed Infinitely variable speed selection from 0–12.5 mph (20 kmph) forward, 0–7 mph (11 kmph) reverse.
Carb Compliant Yes
Deck Lift Hydraulic
Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
Drive Wheel Release Allows unit movement without engine running.
Casters .50″ thick caster yoke arms.
Model Description Lazer Z Diesel 37 HP** Yanmar 3TNV88C Diesel w/96″ UltraCut RD Deck, Susp Seat & 15″ Semi-Pneum
Width / Cutting Deck 72″, 96″ and 144″
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Rear Discharge Deck. Rear-discharge standard with finish cut baffles installed.
Deck Construction 7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
Blade Tip Speed Approximately 18,100 fpm
Cutting Heights 1.0″ (2.5 cm) to 5.5″ (11.8 cm) in 0.25″ (0.64 cm) increments.
Blades 4 Blades at 24.50″ Length
Width 101.2 in. (257.0cm), 72.5 in. @ 3 in. HOC when folded
Length 97.3 in. (247.9 cm)
Height 72.5 in. (244.6 cm)
Curb Weight 2584

Similar Products

Placeholder Image

Lazer Z S-Series Rear Discharge

If you’re looking for a value-packed rear-discharge ride-on mowe...